Catalogue

Freight Offer

New Items

Sign up for Newsletter

Dreki Pauldrons-Matte Polish/Epic Dark - S/M
Dreki Pauldrons-Matte Polish/Epic Dark - S/M
Item no: 20032346
Sizes:
Your price : LoginRRP: 139,99 EUR
EAN Number:5704742208667
Brand:Epic Armoury
Type:Shoulder Armour
Colour:Matte Polish/Epic Dark
Position:Shoulders
Fittings:Leather Straps & Buckles
Size:Small/ Medium
Weight:2800 grams / 98,77 oz
Up. Arm Length:37,0
Up. Arm Width 1:48,0
Up. Arm Width 2:21,0
Released:
Release Date:28-01-2021
Universe:Stalwart

THE WARRIORS OF THE NORTH SHALL NEVER SURRENDER

Epic Armoury’s Dreki Pauldrons are a set of pauldrons with shoulder guards and spaulders, protecting the shoulders and upper armours. These robust steel plates efficiently protect the back of your shoulders and upper arm, while maintaining the same Nordic inspired, imposing, design that is common for the Dreki set. With overlapping plates and rivets and angular design gives these pauldrons an intimidating look, with plates in Epic Dark, that runs down the middle of the pauldron, to give symmetry to the pauldrons. The upper arm protection consists of three pieces of overlapping steel plates held together with two bands leather, which is spilt down the middle with an Epic Dark coated plate, designed to keep symmetry. The Dreki Pauldrons together by two tie strings that is attached to the Dreki cuirass or other compatible torso armours, along with a strap on the lower plate of the Dreki pauldron. With overlapping plates, rivets, and its lean form, you can feel like a fantasy Norsemen, braving the harsh wilderness and slaying ancient dragons among snow covered peaks.

The Dreki set has two colours, the primary being a Matte Polish and the secondary being Epic Dark, to highlight different aspects of the Dreki armour and again show its Nordic inspired roots. Made of 1 mm thick polished mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or re-enactment with regular leather and metal armour care.

INSPIRATION

  • Based in fantasy inspired Nordic Armour such as Skyrim,Dark Souls and modern depictions in other fictional media


  • Made from 1mm/19 gauge thick mild steel
  • Rolled edges with no sharp edges
  • Straps and fittings made from top-grain leather
  • Hand made, riveting and assembly
  • Inspired by nordic fantasy armours as seen in fictional media


Epic Armoury metal works products should be treated with a wax or quality acid-free vegetable oil and kept in dry storage. Metal armour containing leather parts would needs a separate maintenance for the leather. Please read the "Leather Straps and Fittings" section below for leather cleaning and maintenance using leather-care products.

Degreasing and preparing your armour for use

When you open your armour, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armour during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from your plate armour parts. Chainmail is a bit harder to remove all the oil from the links, but it can be done in much the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it on the links. You can also choose to fully submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution, this will completely remove all oil and grease from your links. After removal of the oil, make sure to dry your armour thoroughly. Strong, warm sunlight is great for drying your armour, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather parts when using a heat gun.

Cleaning

Moisture is the enemy of armour and chainmail. If your armour does get wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coating of wax to the entire surface of the exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.

Rust-Prevention and Removal

Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage.

Leather Straps and Fittings

Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.

You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.



All prices are without vat

Copyright © 2014 Iron Fortress ApS